Shenzhen Co-Progress Technology Co., Ltd.
Main products:Speaker,Mini Speaker,Power Bank,Climbpod For Iphone
Products
Contact Us
  • Contact Person : Ms. Xia Liya
  • Company Name : Shenzhen Co-Progress Technology Co., Ltd.
  • Tel : 86-755-29364392
  • Fax : 86-755-29364392
  • Address : Guangdong,Shenzhen,Room 206 (Workplace), No. 68, Xintian Industrial Park, Xintian Community, Fuyong Street, Bao'an District
  • Country/Region : China
  • Zip : 518103

electronic portable personal anti-lost alarm

electronic portable personal anti-lost alarm
Product Detailed
electronic portable personal anti-lost alarm 1. anti-lost and searching function 2. capacity: 0-25m 3. with a string to carry

electronic portable personal anti-lost alarm

Search Keyword: anti-lost alarm

<Specification>

itemportable anti-lost alarm
transmitter sizeabout 2.45 × 0.7cm
transmitter weightabout 6.5g
battery3V CR2032 (included)
transmitter battery life8 hours per day then it can be used about 3 weeks.
receiver sizeabout 6 × 3.6 ×1.5cm
receiver weightabout 35.5g
battery1.5V AAA ×1(not included in a package)
receiver battery life8 hours per day with 32 times cue tone every minute then it can be used about 2 months.
package sizeabout 20 × 8 × 1.7cm
functionanti-lost/searching fuction

 <Product Description>

Anti-lost function: Turn the switch on receiver to N-ON, LED shines; turn on the transmitter, LED shines. Set the monitoring distance via the distance dial. When the distance between receiver and transmitter is out of the range of setting distance, the receiver sends out alarms and vibrates Searching function: Turn on the transmitter and LED shines; turn the switch on receiver to S-ON. When the sender is within the receiving distance, the receiver receives the signal and sends out alarms and vibrates when approaching the transmitter; when the transmitter is out of the range of the setting distance, LED on the receiver will not flash and no alarms sent out. Effective distance: 0-25m without any interruption.

<Instrution>

A. Battery Loading (only receiver's battery is required):

Transmitter

Unscrew the fixed nail on the back , take down the shell from the back.Take out the circuit board inside.

Receiver

Press and push back with a little strain.The negative pole of the battery tightly sustains spring of the interior surface. Load the 1.5V AAA battery into battery jar.Place on shell of battery cover.

B. Battry Detection:

Transmitter

Dial switch to ON, red signal light flickers when brightness of signal light turns to dimness noticeable then it may indicate the electric quantity shortage nd the battery should be replaced.

Receiver

Dial to S-ON, the receiver exists in searching state, the signal light of the receiver flickers after it receives the signal from sender and alarms with warning tone and noticeable vibration of motor.

C. Details

Transmitter

Put ont he protected object. Unfasten the antenna and put it straight when using.

the red signal light flicker and proceeds to trasmit signal.

Dial the power supply to ON when using, dial to OFF when finishing using.

Receiver

Carry with yourself ot the host.

electronic portable personal anti-lost alarm



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.